Rubber Base Marker Base 5 ml LUNAmoon

LUNAmoon Rubber Base Marker is a transparent universal base in an innovative marker format with a thinner liquid formula designed for flawless and precise application. The product is intended to be used as a substrate under solid materials and colored bases.

The modern marker format allows nail technicians to work faster, more accurately, and with better product control during application.

Features of LUNAmoon Rubber Base Marker

• Transparent universal base with liquid consistency;
• Thinner formula compared to the standard LUNAmoon Rubber Base;
• Intended as a base layer for solid materials and colored bases;
• Acidity level: 3–4 pH;
• May create a feeling of warmth or burning on damaged and very thin nails, but not on healthy nails;
• Recommended lamp power for curing: 36–48W;
• Must be cured in an original lamp;
• Provides 100% adhesion when the correct application technique is followed;
• Easily removable by filing or soak-off liquid;
• Hypoallergenic formula with a neutral odor;
• Volume: 5 ml;
• TPO FREE formula.
  
  

Advantages of the LUNAmoon Rubber Base Marker Format

• Precise application with controlled product amount;
• Economical product usage without unnecessary waste;
• Faster work process thanks to natural pen-like movements during application.
  
  

How to Apply LUNAmoon Rubber Base Marker

1. Remove the previous coating;
2. Do not file the nail shape or leave 2 mm of length to refine after leveling;
3. Use a 220-grit file or a 100-grit buffer to gently prepare the nail surface without excessive pressure;
4. Perform manicure preparation;
5. If removers were used, wash hands with soap after use;
6. Degrease the nails with LUNAmoon Nail Prep using two applications. Use four wipes total (one wipe for five fingers). First application: wipe the nail surface. Second application: use an orange stick wrapped with a wipe to clean the cuticle area and sidewalls;
7. Apply LUNAmoon Ultrabond if necessary. Before application, wipe excess product from the brush using a lint-free wipe. Apply using a semi-dry brush and wait 1 minute for absorption into the nail plate;
8. Apply the base coat using LUNAmoon Rubber Base Marker directly to the nail plate and cure for 60 seconds;
9. Remove the sticky layer;
10. Cover and level the nails using any preferred material such as colored base or extension gel. Cure for 120 seconds;
11. Refine the nail shape after leveling to create proper thickness at the free edge;
12. If the natural nail is thin, trim 1 mm of the natural nail from the inside to prevent lifting or curling;
13. After filing, remove the sticky layer and apply a thin layer of gel polish or camouflage base;
14. Apply top coat and cure for 120 seconds. Do not wipe after curing to preserve maximum shine.

Important Storage Information for LUNAmoon Rubber Base Marker

• Do not leave the marker open;
• Close the cap tightly after use;
• Avoid exposure to UV/LED light;
• Store in a dark place away from direct sunlight.
  
  

Shelf Life of LUNAmoon Rubber Base Marker

Shelf life: 24 months.
After opening, store for no longer than 18 months.