NISIMA Diamond Drill Bit P874 F023 is a professional diamond-coated drill bit designed for precise and delicate hardware manicure and pedicure procedures. With a 2.3 mm working diameter and an 8.2 mm working part, it provides controlled access to small and detailed treatment areas while maintaining comfortable maneuverability.
Benefits of NISIMA Diamond Drill Bit P874 F023
The red marking indicates fine abrasiveness, making the bit suitable for gentle processing where precision and controlled abrasion are required. Its compact working dimensions make it a practical tool for detailed work around the nail and surrounding skin.
Professional diamond-coated drill bit;
Fine red abrasiveness for delicate processing;
2.3 mm working diameter;
8.2 mm working part length;
Suitable for hardware manicure and pedicure;
Designed for precise, controlled treatment;
Convenient for detailed periungual work;
Suitable for processing keratinized skin;
Helps refine areas around the nail plate;
Compact working part provides good maneuverability;
Fine abrasive action supports gentle finishing;
Suitable for narrow and localized treatment areas;
Precise treatment where fine abrasiveness is preferred.
The 2.3 mm diameter provides a useful balance between precision and surface coverage, while the shorter 8.2 mm working section supports controlled maneuvering.
Applications in Pedicure
The drill bit can also be incorporated into hardware pedicure procedures for:
Detailed treatment around toenails;
Processing localized keratinized skin;
Refining small rough areas;
Precise periungual treatment;
Smoothing previously processed areas;
Finishing work requiring fine abrasive action.
How to Use NISIMA Diamond Drill Bit P874 F023
Securely install the drill bit into a compatible professional e-file.
Select an appropriate rotation speed for the specific procedure and treatment area.
Position the diamond-coated working section against the area being processed.
Work with smooth, controlled movements and light pressure.
Use the 2.3 mm working diameter for accurate localized treatment.
Keep the rotating bit moving continuously rather than holding it in one position.
Regulate and inspect the treatment area to avoid excessive processing.
Complete the procedure once the desired level of refinement has been achieved.
After use, clean the drill bit thoroughly and process it according to the appropriate professional disinfection and sterilization protocol.
Professional Tips
The red marking indicates fine abrasiveness, making the bit suitable for delicate and finishing procedures.
Use light pressure and allow the diamond abrasive surface to perform the work.
The 8.2 mm working length offers controlled maneuverability for detailed areas.
Keep the bit moving continuously to minimize localized friction and heat.
Adjust the working technique according to the treatment area and skin condition.
Avoid unnecessarily aggressive processing when working around delicate periungual tissue.
Thoroughly clean debris from the diamond surface after each procedure.
Replace the drill bit when its abrasive performance noticeably decreases.
Why Choose NISIMA Diamond Drill Bit P874 F023
Fine red abrasiveness provides gentle and controlled processing;
2.3 mm diameter offers a practical balance of precision and coverage;
Compact 8.2 mm working part supports accurate maneuvering;
Suitable for detailed hardware manicure and pedicure procedures;
Useful for periungual and localized skin treatment;
